Care & Cleaning Tips

The leather part of Bekrvio furniture products (such as the seat cushion surface, backrest surface, etc. of some chairs) is mainly polyurethane leather or bridle leather.

They have stronger environmental protection, durability, variability, softness, stain resistance, etc., and are the most widely used leather materials on the market.

Dust or debris: Use a clean cotton cloth or cleaning brush to gently wipe off the dust or debris. Do not wash with water.

Stains: Wipe with a clean damp sponge or soft cloth dipped in mild detergent and let dry naturally.

Beer, coffee, drinks, etc.: Immediately wipe it dry with a clean cloth or sponge , then wipe it with a soft cloth dipped in warm water and let it dry naturally. Do not blow dry with a hair dryer.

Oil stains: First wipe the oil stain with a soft cloth ( such as glasses cloth ), and then wipe it again with cleaning fluid. Do not wash with water or rub hard.

Stains and spots: Use a mild soap or special leather cleaner and avoid strong rubbing.

Colored writing: Use a mild leather cleaner. If it's an ink stain, using an ink remover stick can effectively remove or reduce visible ink marks on most leathers.

Note: When cleaning is required, try to use a professional mild leather cleaner and follow its instructions.

1. Once a week , moisten a dry towel with water and wring it out. Repeat several times to wipe gently.

2. Do not expose leather furniture to the sun, as this will cause the leather to dry out and fade.

3. When wrinkles occur on the leather part, you can use an iron to set the temperature of the wool and iron it with a piece of cloth.

4. Do not place newspapers or magazines on leather furniture. Ink from these items may transfer to the leather.

5. Do not use or place sharp objects on leather products. Leather is very durable; however, it does not protect against accidents or damage.

6. If there are metal accessories on the leather , avoid rusting the metal parts when cleaning . After cleaning, metal fittings should be wiped with a dry cloth . If the metal parts are slightly oxidized, you can gently wipe them with flour.

The wood / bamboo parts of Bekrvio furniture products (such as some chair legs, coat racks, etc.) are mainly made of various solid wood, composite wood or bamboo.

Almost all of their surfaces have a layer of environmentally friendly paint, which can make wooden furniture more durable and beautiful.

Dust: wipe it clean with a clean soft cloth.

Stains/spots: Dampen a soft cloth with a mixture of hot water and liquid detergent and wring it out. Gently wipe the stain clean. Then immediately dry the surface with a clean soft towel.

1. Once a week, wet a clean and soft cloth, wring it dry, and gently wipe the surface. Make sure there are no water stains on the furniture surface.

2. Do not use harsh chemicals or abrasive cleaners on wooden parts as they can cause huge damage to the paintwork.

The fabric part of Bekrvio furniture products (such as the seat cushion surface and backrest surface of some chairs) is mainly velvet, fabric, cotton and linen.

They can bring good comfort and contact to the skin, and are often used in the production of bed sheets and clothing.

Dust: Vacuum cleaners are great at removing dust, but avoid super strong suction to avoid damage to fabrics. You can install a flat suction head on the vacuum cleaner and adjust the suction power to medium to clean dust on fabrics or in fine crevices.

Stains: Mix a little soda ash with water. Then use a clean soft cloth dipped in soda ash solution to wipe the surface of the fabric to remove the stain, and then wait for it to dry naturally.

Difficult stains to clean: Dilute household detergent with water, then use a soft-bristled brush (such as a toothbrush) dipped in the mixed solution to gently wipe it, and then allow it to air dry. Never wipe hard.

1. Do not use or place sharp objects on the fabric part. They may be damaged or scratched.

2. Avoid placing it in high temperature, high humidity and unclean environments, otherwise it will easily cause mildew.

3. The fabric part generally cannot be changed and washed. Please try to avoid getting it stained by drinks, coffee or colored pigments.

Some products of Bekrvio furniture have simulated polyethylene rattan, such as the backrests of some bar stools.

It has strong environmental protection, corrosion resistance, breathability, comfort, practicality, etc., and is not easy to fade, or rust. The number of families using rattan furniture is increasing at an alarming rate.

Dust: Wipe clean with a clean soft cloth, soft brush or vacuum cleaner. Do not rub the surface of the rattan with hard objects, as it will cause damage to the rattan.

Stains, water stains, etc.: Wipe with a clean cloth dipped in warm water. Then let it dry naturally , do not blow dry with a hair dryer.

Beer, coffee, drinks, etc.: Add an appropriate amount of mild detergent and white vinegar to warm water and wipe with a clean cloth dampened in water. Make sure there are no water stains on the surface and allow it to dry naturally.

Bird droppings, oil stains, sauce, etc.: Add an appropriate amount of mild detergent to warm water and wipe with a clean cloth dampened in water. Make sure there are no water stains on the surface and allow it to dry naturally.

1. Avoid exposure to high temperature and high humidity.

2. Do not use sharp instruments to scratch the rattan, as this may cause damage.

3. Do not use harsh chemicals or abrasive cleaners on rattan sections as they can cause extensive damage to the rattan.

4. Placing it in a ventilated indoor environment will extend the service life of rattan.

The metal parts of Bekrvio furniture (such as the legs of some bar chairs, the connectors of the backrests, etc.) are mainly iron and stainless steel.

Their surfaces have environmentally friendly chrome plating process coatings or spray coatings, which can greatly improve the durability and beauty of the furniture.

Dust: Wipe with a clean, dry cloth.

Stains/spots: Wet a clean soft cloth, wring it out, and wipe it clean gently. Make sure there are no water stains on the surface.

1. Usually just wiping with a dry, clean cloth is enough.

2. Do not use harsh chemicals or abrasive cleaners on metal surfaces as they can cause extensive damage.

3. Avoid exposure to moisture, iron or steel frames may rust.

Some products of Bekrvio furniture are made of glass, such as some end tables and coffee tables.

Dust: Usually wipe it with a clean lint-free cloth.

Stains/spots: Using warm water and a soft, lint-free cloth, wring out excess water and wipe the glass surface. Choose a non-abrasive commercial glass cleaner if necessary.

1. Do not slide rough objects on the glass. This may cause permanent scratches on the surface.

2. Abrasive cleaners on glass as this may cause scratches.

3. Before cleaning glass, gently remove excess dirt and debris to avoid scratching the surface.

Some Bekrvio furniture is made of plastic, such as the seat of the Tinta bar stool.

They have good impact resistance, environmental protection, stability, and glossiness, and are usually used in the production of decorative furniture.

Dust: Wet a clean soft cloth and wipe gently. Then use a dry soft cloth to dry the surface to avoid water spots.

Stains/Spots: Scrub gently with a soft cloth or sponge dipped in mild detergent. Do not use hard and sharp tools such as coarse cloths and brushes for cleaning, as they may cause damage to the surface.

Grease, paint, marks, etc.: Wipe with a soft cloth dipped in alcohol.

1. Avoid exposure to high temperature and high humidity.

2. The water temperature for cleaning needs to be below 60℃.

3. Do not slide sharp or rough objects on plastic. This may cause permanent scratches.

4. Do not use hard tools such as coarse cloth and brushes to clean plastic furniture. This may damage the plastic surface.

5. Do not use abrasive cleaners or irritating chemicals on plastic furniture. Please use a neutral detergent and follow its instructions.

6. Esters, ketones, halogenated hydrocarbons and all substances that can dissolve or swell polycarbonate plastics are prohibited.

If you find any holes, tatters, damage, missing, etc. in the furniture, please do not repair it without authorization and please Contact Us as soon as possible.